Ip Tacacs Source-Interface - Cisco Nexus 7000 Series Command Reference Manual

I Commands

ip tacacs source-interface

To assign a global source interface for the TACACS+ server groups, use the ip tacacs source-interface
command. To revert to the default, use the no form of this command.
ip tacacs source-interface interface
no ip tacacs source-interface
Syntax Description
interface
Command Default
Any available interface
Command Modes
Global configuration
Command History
Release
4.1(2)
Usage Guidelines
You must use the feature tacacs+ command before you configure TACACS+.
This command does not require a license.
Examples This example shows how to configure the global source interface for TACACS+ server groups:
switch# configure terminal
switch(config)# ip tacacs source-interface mgmt 0
This example shows how to remove the global source interface for TACACS+ server groups:
switch# configure terminal
switch(config)# no ip tacacs source-interface
Related Commands
Command
feature tacacs+
show tacacs-server groups
Source interface. The supported interface types are
ethernet, loopback, and mgmt 0.
Modification
This command was introduced.
Description
Enables the TACACS+ feature.
Displays the TACACS+ server group configuration.
Cisco Nexus 7000 Series Security Command Reference
ip tacacs source-interface
425