Cisco Nexus 7000 Series Command Reference Manual page 686

set precedence (policy map class)
Command History
Release
4.0(1)
Usage Guidelines
You can use this command only in the default virtual device context (VDC).
This command does not require a license.
Examples This example shows how to configure the CoS value for a control plane policy map:
switch# configure terminal
switch(config)# policy-map type control-plane PolicyMapA
switch(config-pmap)# class ClassMapA
switch(config-pmap-c)# set precedence critical
This example shows how to revert to the default CoS value for a control plane policy map:
switch# configure terminal
switch(config)# policy-map type control-plane PolicyMapA
switch(config-pmap)# class ClassMapA
switch(config-pmap-c)# no set precedence critical
Related Commands
Command
class (policy map)
policy-map type control-plane
show policy-map type control-plane
Cisco Nexus 7000 Series Security Command Reference
660
Modification
This command was introduced.
Description
Specifies a control plane class map for a control plane
policy map and enters policy map class configuration
mode.
Specifies a control plane policy map and enters policy
map configuration mode.
Displays configuration information for control plane
policy maps.
S Commands