Cisco Nexus 7000 Series Command Reference Manual page 683

S Commands
cs4
cs5
cs6
cs7
ef
default
Command Default
default
Command Modes
Policy map class configuration
Command History
Release
4.0(1)
Usage Guidelines
You can use this command only in the default virtual device context (VDC).
This command does not require a license.
Examples This example shows how to configure the DSCP value for a control plane policy map:
switch# configure terminal
switch(config)# policy-map type control-plane PolicyMapA
switch(config-pmap)# class ClassMapA
switch(config-pmap-c)# set dscp 4
This example shows how to revert to the default DSCP value for a control plane policy map:
switch# configure terminal
switch(config)# policy-map type control-plane PolicyMapA
switch(config-pmap)# class ClassMapA
switch(config-pmap-c)# no set dscp 4
Specifies class selector 4 (precedence 4) DSCP
(100000).
Specifies class selector 5 (precedence 5) DSCP
(101000).
Specifies class selector 6 (precedence 6) DSCP
(110000).
Specifies class selector 7 (precedence 7) DSCP
(111000).
Specifies expedited forwarding DSCP (101110).
Specifies default DSCP (000000).
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
set dscp (policy map class)
657