Battery-Powered Devices; Wireless Devices - Polar Electro Team2 Manual

Team2 SW Help
•
Do not overload your wall outlet, extension cord, power strip, or other electrical
receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by
the device (indicated on the power supply unit) and any other devices that are on the
same circuit.
To Avoid Damaging the Power Cords and Power Supply:
•
Protect the power cords from being walked on.
•
Protect cords from being pinched or sharply bent, particularly where they connect to the
power outlet, the power supply unit, and the device.
•
Do not jerk, knot, sharply bend, or otherwise abuse the power cords.
•
Do not expose the power cords to sources of heat.
•
Keep children and pets away from the power cords. Do not allow them to bite or chew on
them.
•
When disconnecting the power cords, pull on the plug - do not pull on the cord.
If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug
your device during lightning stroms or when unused for long periods of time.
For devices with an AC power cord that connects to the power supply, always connect the power
cord according to the following instructions:
1. Plug the AC power cord into the power supply unit until it stops.
2. Plug the other end of the AC power cord into the wall outlet.

Battery-Powered Devices

These precautions apply to all products that use rechargeable or disposable batteries.
Improper use of batteries may result in battery fluid leakage, overheating, or explosion. Released
battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if
swallowed.
Rechargeable Batteries Only:
•
Charge only with the recharger provided with the product.

Wireless Devices

160