Advertisement
Changing Battery
All connectors have user changeable batteries.
To change the battery yourself, follow the
instructions below, and see the markings on the
connector and pictures on the back cover of this
user manual.
1.
Lever the battery cover open by using the
clip on the strap. Picture C1.
2.
Remove the old battery from the battery
cover with a suitable sized small ridgid
stick or bar, such as a toothpick. A
non-metal tool is preferable. Be careful not
to damage the battery cover. Picture C2.
3.
Insert a new battery (CR 2025) inside the
cover with the negative (-) side facing up.
Picture C3.
4.
Align the ledge on the battery cover with
the slot on the connector and press the
battery cover back into place. You should
hear a snap. Picture C4.
When changing the battery, make sure the
sealing ring is not damaged, in which case you
should replace it with a new one to ensure the
water resistance of the connector.
You can purchase the sealing ring/battery kits at
well-equipped Polar retailers and authorized
Polar Services. In the USA and Canada, the
additional sealing rings are available at
authorized Polar Service Centers.
Keep batteries away from children. If
swallowed, contact a doctor immediately.
Batteries should be properly disposed of
according to local regulations.
Caution: Risk of explosion if battery is replaced
by an incorrect type. Dispose of batteries
according to the instructions.
4
Advertisement
