Show Startup-Config Command - Avaya P333R User Manual

Chapter 7 Cajun Campus CLI - Layer 3

show startup-config Command

Use the show startup-config command to show configuration loaded at
startup.
The syntax for this command is:
show startup-config
show system Command
Use the show system command to show the P333R system parameters.
The syntax for this command is:
show system
set device-mode Command
Use the device-mode command to change the Basic Mode of Operation of the
Avaya P333R Module between EZ2route, Router and Layer 2 modes.
The syntax for this command is:
set device-mode <mode>
mode
set system contact Command
The syntax for this command is:
set system contact [contact string]
Example:
set system contact "Gabby ext.545"
set system name Command
The syntax for this command is:
set system name [name string]
Example:
Router-N> set system name "Banking System"
152
EZ2route | Router | Layer2
Avaya P333R User's Guide