Set Qos Policy-Source Command - Avaya P333R User Manual

Example:
Router-N(configure)# validate-group 101

set qos policy-source Command

Use the set qos policy-source command to set the policy source. The default
policy source is policy-server.
Note: Before configuring the IP access list, you must change the policy source mode
to local.
The syntax for this command is:
set qos policy-source <source>
source
Example:
Router-N(configure)# set qos policy-source local
set qos dscp-cos-map Command
Use the set qos dscp-cos-map command to configure the DSCP table.
The syntax for this command is:
set qos dscp-cos-map <dscp1>-<dscp2> <cos>
dscp1
dscp2
cos
Example:
Router-N(configure)#set qos dscp-cos-map 9-16 fwd3
set qos dscp-name Command
Use the set qos dscp-name command to configure the DSCP entry name.
Avaya P333R User's Guide
local | policy-server
lower (0-63)
upper (0-63)
fwd0-7
Chapter 7 Cajun Campus CLI - Layer 3
213