3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program
3.27.2
Modem test
For this subtest, connect the modem PCB and RJ11 connector with a harness. Use the
dedicated "FAT-MODE inspection device (product code: QE2000P01 made by Nitto Denki
Seisakusyo)" for the tests.
Select 2 to execute and press Enter. The following message will appear:
[Modem loopback test !]
ICHx MDC Test Program with Modem Sound (Line Test)
Version X.X
* Scorpio Modem Initialize
* Digital Loopback Test
* Modem Sound Test
After a few seconds, the following message will appear:
...Press Key (Y = OK, N =NG)
If you hear the modem sou
NOTE: The menu displayed by your computer may be slightly different from the one
shown above.
After you press Y or N, the RJ11 Connection Check (LED) (Operator's Check LED) test will
be executed, and the following message will appear:
...Press Key (Y = OK , N =NG)
If the color in the LED of the connection checker is orange, press Y. Otherwise, press N.
QOSMIO E10 Maintenance Manual (960-492)
d from the speakers, press Y, otherwise, press N.
n
3 Tests and Diagnostics
:OK
:OK
:(Operator's Check!!)
3-61