Toshiba QOSMIO E10 Maintenance Manual page 185

3.28 Sound Test program
Press 9 and Enter, then following message appears in the display.
***********************************
******** May I Reboot ?
***********************************
Press any key to continue...
After pressing any key, the machine starts rebooting and sound test menu appears in the
display.
Subtest01 Microphone recording & play
This subtest checks the function of the CODEC A/D D/A converter.
Before executing this subtest, connect an external microphone to the
computer.
When the subtest is selected, the following message appears.
[Recording & play test !]
And the following message will appear.
DOS/4GW Protected Mode Run-time Version X.XX
Copyright (c) Tenberry Software, Inc. XXXX
After this message appeared, display stops briefly. The sound is recorded in
this time.
After the recording is completed, the computer immediately plays back the
sound recorded after the following message.
STACWAVE Version X.XX
Build data: XXX XX XXXX at XX:XX:XX
Loading "mic.wav".
Caution: The message in the display might have slight difference from those above.
The display returns to the Sound (Standard) test menu after the test ends.
QOSMIO E10 Maintenance Manual (960-492)
********
3 Tests and Diagnostics
3-73