Toshiba QOSMIO E10 Maintenance Manual page 121

3.3 Setting of the hardware configuration
After completion of the above settings, the DMI information and the H/W
configuration & DMI information are appeared in order. Check the contents
and press Enter.
Subtest 02 Region write
This subtest executes the setting of the region code for DVD drive based on
the destination of the machine.
When the region code is already written, test ends without setting.
The following message appears in the display after setting the region code.
Press any key to return to the H/W initial information setting tool menu.
QOSMIO E10 Maintenance Manual (960-492)
5. "Enter Bundle Number ?" is displayed.
Input the computer's PCN/Bundle number and press Enter.
(e.g. PMSREQ3Q34H/S0123456789)
6. "Write data OK (Y/N) ?" is displayed.
To write the DMI information to the Flash ROM, press Y,
and then Enter.
7. "Create DMIINFO TXT (Y/N) ?" is displayed.
Press Y, then the DMI information (text data) is written to the Floppy
disk, etc.
Setting of the HWSC
Setting of the UUID
Display of the DMI information (including UUID)
***********************************
******* It completed
***********************************
*
Press any key to continue...
3 Tests and Diagnostics
*******
*
3-9