Replacing The 15.0-Inch (Xga) Sharp Fluorescent Lamp - Toshiba QOSMIO E10 Maintenance Manual

4 Replacement Procedures

4.25.1 Replacing the 15.0-inch (XGA) Sharp fluorescent lamp

Removing the 15.0-inch XGA Sharp fluorescent lamp
To remove the 15.0-inch XGA Sharp Fluorescent Lamp, follow the steps below and refer to
Figures 4-47 to 4-56.
1. Turn the LCD module face down, and remove the protection cover S (A) and two
fixing tapes (B), (C).
CAUTION: 1) Be careful not to damage the TCP and chip.
2) Discard the tapes removed.
3) The protection cover S (A) is reused. Do not peel off the place sticked to
the bezel.
Figure 4-47 Replacing Sharp fluorescent lamp (XGA) (1)
4-72
4.25 Fluorescent Lamp
QOSMIO E10 Maintenance Manual (960-492)