Toshiba QOSMIO E10 Maintenance Manual page 200

3 Tests and Diagnostics
(f) Sound Logo
This option enables or disables sound logo function.
Enabled
Disabled
(g) Power Button Lamp
This option sets the power button lamp.
Off
Mode 1
Mode 2
Mode 3
8. Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
NOTE: When using installed OS, selecting "Set by OS" is recommended. But, when
setting "PC CARD-Controller Mode" to other than " Auto-Selected", select " All
Devices".
3-88
Enables the sound logo function. (Default)
Disables the sound logo function
Always off.
Sets to Mode1. (Default)
Glows blue (Power ON) / Glows yellow (Standby) / Glows
orange (Power OFF/Hibernation)
Sets to Mode 2.
Glows blue (Power ON) / Alternately flashes green and
orange (Standby) / Alternately flashes green and blue
(Power OFF/Hibernation)
Sets to Mode 3.
Changes in order of green, orange and blue (Power ON) /
Glows yellow (Standby) / Glows orange (Power OFF
/Hibernation)
BIOS sets all devices.
Initializes devices, which is needed to load an operating
system. Operating system initializes other devices.
When this option is selected, the setting in the "PC
Card" becomes "Auto-Selected" and it can not be
changed. (Default)
QOSMIO E10 Maintenance Manual (960-492)
3.29 SETUP