Toshiba QOSMIO E10 Maintenance Manual page 251

4.13 TV board
Installing the TV board
The following describes the procedure for installing the TV board (See Figure 4-24).
1. Connect the TV tuner coaxial cable to connector PJ9611 on the TV board.
2. Connect the TV tuner harness to the connector PJ9614 on the TV board.
3. Connect the USB harness to the connector PJ9616 on the TV board.
4. Install the TV board and secure it with the following screws.
• M2.5×4B FLAT BIND screw
QOSMIO E10 Maintenance Manual (960-492)
4 Replacement Procedures
x2
4-43