Sj Board/Microphone; Sj Board - Toshiba QOSMIO E10 Maintenance Manual

4 Replacement Procedures
4

4.11 SJ board/Microphone

4.11.1 SJ board

Removing the SJ board
The following describes the procedure for removing the SJ board (See Figure 4-20).
1. Disconnect the microphone cable from the connector PJ6000 on the SJ board.
2. Disconnect the SJ board flat cable from the connector PJ9560 on the SJ board.
3. Remove the following screw fixing the SJ board and remove the SJ board.
• M2×4Z
4. Pull out the SJ board flat cable from the slit of the middle frame.
M2x4Z BIND
4-36
BIND screw
SJ board
PJ6000
Microphone cable
Figure 4-20 Removing the SJ board
4.11 SJ board/Microphone
x1
PJ9560
Slit
SJ board flat cable
QOSMIO E10 Maintenance Manual (960-492)