Touch Pad - Toshiba QOSMIO E10 Maintenance Manual

4 Replacement Procedures
4.10

Touch pad

Removing the touch pad
The following describes the procedure for removing the touch pad (See Figure 4-19).
1. Remove the following screws fixing the touch pad plate and remove the touch pad
plate.
• M2.5×2.8B
2. Disconnect the touch pad flat cable from the touch pad.
3. Remove the following screws securing the touch pad.
• M2.5×2.8B
4. Peel off touch pad to remove.
Touch pad
M2.5x2.8B FLAT BIND
4-34
FLAT BIND screw
FLAT BIND screw
Figure 4-19 Removing the touch pad
x4
x2
M2.5x2.8B FLAT BIND
Touch pad flat cable
QOSMIO E10 Maintenance Manual (960-492)
4.10 Touch pad