Audio Cd - Toshiba QOSMIO E10 Maintenance Manual

3 Tests and Diagnostics
Selected this subtest, narration in English starts. Refer to the subtest01 for the
procedure on the test.
Subtest03 Test Tone A
Caution: Before starting subtest03, be sure to set the sound at proper volume.
This subtest plays sine wave data table from 100Hz to 20Hz.
Return to the CD Sound (Standard) menu after the test ends.
Subtest 04 Test Tone B
This subtest plays sine wave data table from 400Hz to 3KHz while changing
the channel from left speaker to right speaker.
Return to the CD Sound (Standard) menu after the test ends.
3.28.3.2

Audio CD

Insert an audio CD and the following menu appears in the display.
CD/DVD TEST
SUB-TEST : XX
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS : XXXXXX
CD Sound track number (01-98 : Track) ?
3-76
IN PROGRESS XXXXXXXX
ERROR COUNT: XXXXX
READ DATA
STATUS
3.28 Sound Test program
xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] ; test end
[Ctrl]+[C]
: XX
: XXX
Drive # = 0, ATAPI status =00
Command = XX
[[Block address = XXXXXXXX]]
[[Block length
Final : Block address = XXXXXXXXX
QOSMIO E10 Maintenance Manual (960-492)
; key stop
= XXXXXXXX]]