Lcd Harness - Toshiba QOSMIO E10 Maintenance Manual

4 Replacement Procedures 4.23 Wireless antennas/ LCD harness

4.23.2 LCD harness

Removing the LCD harness
The following describes the procedure for removing LCD harness (See Figure 4-42 and 4-43).
1. Remove the following screw securing the LCD harness holder and remove the LCD
harness holder (Display cover side).
• M2.5×4B
FLAT BIND screw x1
M2.5x4B FLAT BIND
LCD harness holder
Figure 4-42 Removing the LCD harness holder (display cover side)
4-64 QOSMIO E10 Maintenance Manual (960-492)