4.25 Fluorescent Lamp
2. Turn the backlight unit face down and install a new lamp unit (T) on the P-chassis.
CAUTION: When install the lamp unit (T), be careful not to bend or damage the
reflection sheet.
Figure 4-58 Replacing Sharp fluorescent lamp (XGA) (12)
Cross-section drawing of Z-Z
Figure 4-59 Replacing Sharp fluorescent lamp (XGA) (13)
QOSMIO E10 Maintenance Manual (960-492)
Install the lamp unit without floating.
Install the reflection sheet as it is placed inside the reflector.
4 Replacement Procedures
4-81