4.25 Fluorescent Lamp
5. Place the lower diffusion sheet (M), lower lens sheet (L), upper lens sheet (K) and
upper diffusion sheet (J) on the backlight unit with light guide plate (N).
Make sure there is no dust or scratch.
Do not make any sheet over
the edge of P-chassis.
Figure 4-62 Replacing Sharp fluorescent lamp (XGA) (16)
QOSMIO E10 Maintenance Manual (960-492)
4 Replacement Procedures
An Order of the sheets
placing is: (M), (L), (K)
and (J).
4-83