Toshiba QOSMIO E10 Maintenance Manual page 282

4 Replacement Procedures
4. Turn the LCD module face down and remove the three screws (D) fixing the board.
Then open the bent portion of the TCP of the board and remove the backlight.
Screw loosening torque: 1.2kg.cm
Figure 4-50 Replacing Sharp fluorescent lamp (XGA) (4)
Do not hold the edge.
Figure 4-51 Replacing Sharp fluorescent lamp (XGA) (5)
4-74
4.25 Fluorescent Lamp
Do not hold the edge.
QOSMIO E10 Maintenance Manual (960-492)