Toshiba QOSMIO E10 Maintenance Manual page 239

4.9 Display assembly
5. Disconnect the LCD harness from the connector PJ5600 on the system board.
6. Disconnect the touch pad cable from the connector PJ3201 on the system board.
7. Turn up the insulators and pull out the wireless LAN antenna relay cables from the
guide.
8. Disconnect the SJ board flat cable from the connector PJ9550 on the sound board.
QOSMIO E10 Maintenance Manual (960-492)
LCD harness
PJ5600
Touch pad cable
Figure 4-17 Removing the cables
4 Replacement Procedures
PJ9550
SJ board flat cable
Insulator
PJ3201
4-31