Toshiba QOSMIO E10 Maintenance Manual page 195

3.29 SETUP
HDD Auto Off
Use this option to set the duration of the HDD automatic power off function.
xx Min.
System Auto Off
Use this option to disable or set the duration of the system automatic off
function in Resume mode. In Boot mode, it is disabled.
Disabled
xx Min.
LCD Brightness
Use this option to set the level of LCD brightness.
Super-Bright
Bright
Semi-Bright
Cooling Method
Maximum Performance
Performance
Battery optimized
NOTE: Too hot condition may cause defect on the CPU. When the hot condition
continues, the power is automatically turned off in resume mode.
QOSMIO E10 Maintenance Manual (960-492)
Automatically turns off the power to the hard disk drive
if it is not used for the duration set. The duration xx
can be set to 1, 3, 5, 10, 15, 20 or 30 minutes.
Disables system automatic power off.
Automatically turns off the power to the system if it is
not used for the duration set. The duration xx can be
set to 10, 20, 30, 40, 50 or 60 minutes.
Full brightness for maximum visibility.
Full brightness for high visibility.
Less than full brightness for saving power.
If the CPU becomes too hot, the fan turns on
automatically in a high speed to cool down the
CPU.
If the CPU becomes too hot, the fan turns on
automatically. When the CPU temperature falls
to a normal range, the fan turns off.
If the CPU becomes too hot, the processing
speed is lowered. If the temperature is still too
high, the fan turns on. When the CPU
temperature falls to a normal range, the fan is
turned off and the processing speed is increased.
3 Tests and Diagnostics
3-83