4.22 LCD unit/FL inverter
9. Remove the following screws fixing the LCD unit.
•
10. With the bottom edge of the LCD unit on the display cover, lift only the top edge of
the LCD unit. After peeling off the glass tape, disconnect the LCD harness from the
connector on the back of the LCD. Remove the LCD unit.
M2x4Z SUPER THIN HEAD
LCD unit
QOSMIO E10 Maintenance Manual (960-492)
M2x4Z
SUPER THIN HEAD screw
LCD harness
Figure 4-38
Removing the LCD unit
4 Replacement Procedures
x4
Glass tape
4-59