Speaker - Toshiba QOSMIO E10 Maintenance Manual

4 Replacement Procedures

4.21 Speaker

Removing the Speaker
The following describes the procedure for removing the speaker (See Figure 4-35).
1. Turn up the insulators and pull out the speaker cable L (red cable) from the
insulators.
2. Remove the speaker L from the guide of base assembly.
3. Remove the speaker R from the guide of base assembly.
Speaker R
Speaker cable L
Installing the Speaker
The following describes the procedure for installing the speaker (See Figure 4-35).
NOTE: When installing speakers, make sure they are fit to the slots closely by pressing
them from the top.
1. Install the speaker R along the guide of the base assembly.
2. Install the speaker L along the guide of the base assembly.
3. Arrange the speaker cable L and fix it with the insulators.
4-56
Insulator
Figure 4-35 Removing the speakers
Speaker L
QOSMIO E10 Maintenance Manual (960-492)
4.21 Speaker