3 Tests and Diagnostics
3.25 Sound/LAN/Modem Test Program
This section describes how to perform the Sound/LAN/Modem test with the test program.
Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the
DIAGNOSTIC TEST PROGRAM, follow these steps:
(a) Insert the Diagnostics disk in the floppy disk drive and turn on the computer.
(The Diagnostics Disk contains the MS-DOS boot files.)
The following menu shown in figure 3-11 will appear:
############################################################################
####
Satellite 1400/2400 DIAGNOSTICS PROGRAM (SOUND/LAN/MODEM TEST )
############################################################################
*
*
1 ............ ( Microphoned Recording & play )
*
2 ............ ( DOREMI )
*
3 ............ ( LAN )
*
4 ............ ( MODEM )
*
****************************************************************************
.... Press test number[1-4] ? _
(b) To execute the TEST, select the option number you want to execute and press Enter.
.
3-76
Figure 3-1 Sound/LAN/Modem test Menu
Satellite 1400/2400 Maintenance Manual (960-364/365)
3.25 Sound/LAN/Modem Test Program
####
*
*
*
*
*
*