4 Replacement Procedures
4.23
Wireless antennas/ LCD harness
4.23.1 Wireless antennas
Removing the wireless antennas
The following describes the procedure for removing the wireless antennas (See Figure 4-40
and 4-41).
1. Pull out the Wireless LAN antenna cables from the guide of the middle frame.
2. Turn up the insulators and pull out the bluetooth antenna cable from the guide of
middle frame.
Figure 4-40
4-62
Bluetooth antenna cable
Removing the wireless antenna cables
4.23 Wireless antennas/ LCD harness
Wireless LAN antenna cable
Insulator
QOSMIO E10 Maintenance Manual (960-492)