Installing the 1120E IP Deskphone
Figure 7: Wall-mount lever.
Related links
Installing the 1120E IP Deskphone
Removing the stand cover
Connecting the AC power adapter (optional)
Connecting the handset
Connecting the headset (optional)
Selecting the headset tuning parameter
Connecting the LAN ethernet cable
Installing additional cables
Wall-mounting the IP Deskphone (optional)
Removing the stand cover
To access the cable routing tracks and attach cables, you must remove the stand cover. Pull
upward on the center catch as indicated in the following figure, and remove the stand cover. The
cable routing tracks are now accessible.
May 2016
on page 36
on page 38
on page 40
on page 40
on page 40
on page 41
on page 42
Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
on page 39
on page 42
®
User Guide
38