Configuring Menu Auto Back-Out - Avaya 1120E User Manual

Configuring Menu Auto back-out

You can use the Menu Auto back-out feature to configure the time interval required for the IP
Deskphone to go back to the idle screen when the IP Deskphone is left inactive.
To configure Menu Auto back-out:
1. Press the Prefs soft key, choose Display, and then Menu Auto back-out.
2. Press the Select soft key.
OR
Press the Back soft key to return to the previous menu.
3. Press the Up/Down navigation key to scroll through the screen and choose the required time
interval.
Choose one of the following values:
• Never
• 10 min
• 5 min
• 2 min
• 1 min
• 30 sec
• 15 sec
Note:
The Never option turns off Menu Auto back-out.
4. Press the Select soft key to configure the Auto back-out time to the selected (highlighted)
value and return to the Display menu.
OR
Press the Back soft key to dismiss the Auto back-out time menu and return to the Display
menu.
Note:
When you enter the Auto back-out menu, the current configuration for the Menu Auto back-out
time is pre-selected (highlighted) on the list.
When you press the Select soft key, the time interval is flagged to commit to the configured
preferences (done after the idle screen is displayed), and is used for menu auto back-outs from that
point forward.
Related links
Configuring the IP Deskphone
May 2016
on page 59
Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
Configuring Menu Auto back-out
®
User Guide 61