Removing The Stand Cover; Connecting The Ac Power Adapter (Optional) - Avaya 1120E User Manual

Warning:
Your Avaya 1120E IP Deskphone is shipped with the base locked in position. To avoid
damaging your phone, press the wall-mount lever, located under the Handsfree key as
indicated in
Deskphone.

Removing the stand cover

To access the cable routing tracks and attach cables, you must remove the stand cover. Pull
upward on the center catch as indicated in the following figure, and remove the stand cover.
The cable routing tracks are now accessible.
Figure 10: Remove the stand cover

Connecting the AC power adapter (optional)

Your IP Deskphone supports AC power and Power over Ethernet (PoE) options, including
IEEE 802.3af standard power. For AC power, use the Avaya AC adapter only. You can order
the optional Avaya AC adapter (N0023000) separately.
Warning:
Use only the approved Avaya AC Adapter (model #N0023000) with your IP Deskphone.
To connect the AC adapter to the AC adapter jack in the bottom of the IP Deskphone use the
following procedure:
Avaya 1120E IP Deskphone with SIP Software User Guide
Wall mount lever on page 40, to release the base and pull it away from the IP
Connecting the components
November 2013 41