Connecting The Handset; Connecting The Headset (Optional); Selecting The Headset Tuning Parameter - Avaya 1120E User Manual

Installing the 1120E IP Deskphone

Connecting the handset

Use the following procedure to connect the handset to the IP Deskphone.
1. Connect the end of the handset cable with a short straight section to the handset.
2. Connect the end of the handset cable with the long straight section, into the RJ-9 handset
jack marked with the handset symbol on the back of the IP Deskphone.
The handset symbol is as follows:
3. Form a small bend in the cable.
4. Thread the handset cord through the channels in the stand so that it exits behind the
handset on the right side, using the handset cord exit in the stand base marked with the
handset symbol.
Related links
Connecting the components

Connecting the headset (optional)

Use the following procedure to connect the optional headset to the IP Deskphone.
1. On the back of the IP Deskphone, plug the headset connector into the RJ-9 headset jack
marked with the headset symbol.
The headset symbol is as follows:
2. Thread the headset cord, along with the handset cord, through the channels in the stand so
that the headset cord exits the channel marked with the headset symbol.
Related links
Connecting the components

Selecting the headset tuning parameter

Follow this procedure after the 1120E IP Deskphone and headset are installed and you are using
the IP Deskphone for the first time with the headset.
You can select a headset from the following list of supported headsets.
• Type 1: Monaural and Binaural Headset
- Monaural Headset: Plantronics Model number: H251N (Part number: 64338-01) with cable
Model Number: A10 (Part Number: 66268-02)
May 2016
on page 36
on page 36
Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
®
User Guide 40