Avaya 1120E User Manual page 74

Deskphone with sip software on avaya aura
Hide thumbs Also See for 1120E:
Table of Contents

Advertisement

Configuring the IP Deskphone
LEDs
Attached Indicator
Back Light
Message Waiting
External Alerter
Incoming Call
Caller ID Information
Call Answer
Outgoing Call
May 2016
Feature
Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
Description
Volume Up/Down keys) as if the keys on the IP
Deskphone are pressed.
If the corresponding keys on the IP Deskphone are
used instead, the IP Deskphone sends the HID
commands to the headsets to allow the headsets to
update their internal state machine.
Both types of headsets have LEDs on the base
station for status indication. These LEDs are
controlled by the headset base stations themselves
according to their internal state machines. The IP
Deskphone has no direct control of these LEDs.
Both types of headsets can have attached indications
independent of the IP Deskphone operations.
The GN Netcom (Jabra) 9350 headset can take over
3 seconds to complete the enumeration process after
the headset is attached to the IP Deskphone. During
enumeration, the LEDs at the bottom of the base
station flash. The enumeration process is complete
only when there is a blink at the headset piece and
the base LEDs become solid.
Not applicable
Not applicable
Not applicable
When there is an incoming call, the IP Deskphone
sends an alerting event to the headset. Each type of
headset has different incoming call indications.
Not applicable
You can answer an incoming call by pressing the
Headset key on the IP Deskphone or the Off Hook
equivalent key on the headset. The IP Deskphone
coordinates the key events from both sources and
performs the necessary call processing operations.
Call connected indications, if available, are
autonomous within the headset to match its internal
state. After a call is answered, audio data flows
between the IP Deskphone and the headset through
the USB.
You can make an outgoing call by either pressing the
Headset key on the IP Deskphone or the Off Hook
equivalent key on the headset. When off hook, the IP
Deskphone streams dial tone to the headset. This
class of headset has no dial pad and the telephone
number must be dialed using the key pad of the IP
Table continues...
®
User Guide
74

Advertisement

Table of Contents
loading

Table of Contents