Avaya 1120E User Manual page 131

Autoprogramming does not overwrite feature keys already programmed and when the IP
Deskphone detects if a feature key is already configured with Speed Dial, Send IM, or Call Forward
for contact, it does not create a new instance.
Note:
The autoprogramming feature options are dependent on your service provider and IP
Deskphone configuration. If you attempt to use the autoprogram feature (Bulk soft key) for a
feature that is not available to you, the IP Deskphone displays the message: This feature
is disabled. Contact your provider.
To autoprogram feature keys:
1. Press the Prefs soft key, select Feature Options, and select Feature Keys from the menu.
The Program Key screen opens.
2. Press the Bulk soft key.
OR
Press the Back soft key to return to the previous step.
3. Press the Select context-sensitive soft key to select menu item 1. Feature key creation.
4. Press the Up/Down navigation key to highlight one of the following services that you want to
autoprogram:
• 1. Speed Dial
• 2. Send IM
• 3. Call Forward
5. Press the Select soft key to autoprogram the feature keys with the selected service.
OR
Press the Back soft key to return to the previous step.
To remove all programmed feature keys by using the Bulk soft key:
To remove all programmed feature keys, or an individual programmed feature key, by using the Bulk
context-sensitive soft key:
1. Press the Prefs soft key, select Feature Options, and select Feature Keys from the menu.
2. Press the Bulk soft key.
3. Press the Up/Down navigation key to highlight the 2. Feature key removal menu item and
press the Select soft key.
4. Press the All soft key to remove all the programmed feature keys.
5. Press the Yes soft key to confirm the removal of all the feature keys.
OR
Press the No soft key to return to the previous screen without removing the feature keys.
May 2016 Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
Feature keys
®
User Guide 131