Connecting The Lan Ethernet Cable - Avaya 1120E User Manual

- Binaural Headset: Plantronics Model number: H261N (Part number: 64339-01) with cable
Model Number: A10 (Part Number: 66268-02)
• Type 2: Monaural and Binaural Headset
- Monaural Headset: Plantronics Model number: HW251N (Part number: 75100-06) with cable
Model Number: A10 (Part Number: 66268-02)
- Binaural Headset: Plantronics Model number: HW261N (Part number: 75101-06) with cable
Model Number: A10 (Part Number: 66268-02)
• Type 3: Binaural Headset
- Binaural Headset: GN Netcom Model number: GN 4800 (Part number: 48492-09)
After you select a headset, the corresponding tuning parameters are applied automatically.
Use the following procedure to select a headset.
1. Press Prefs.
2. Select Audio.
3. Select Headset Type.
Related links
Connecting the components

Connecting the LAN ethernet cable

Note:
Your IP Deskphone supports both AC power and PoE options, including IEEE 802.3 standard
power. To use local AC power, you can order the optional AC adapter separately. To use PoE,
where power is delivered over the CAT5 cable, the LAN must support PoE, and you do not need
an AC adapter.
To enable full functionality of your IP Deskphone, connect your IP Deskphone to your LAN using a
CAT5e Ethernet cable. If your network is equipped with PoE, you can power your IP Deskphone
through the LAN port.
To connect your IP Deskphone to your LAN use the following procedure:
1. Connect one end of the supplied Ethernet cable to the back of your IP Deskphone by using
the RJ-45 connector marked with the network symbol.
The network symbol is as follows:
2. Thread the network cable through the channel marked with the network symbol.
3. Connect the other end of the cable to your LAN Ethernet connection.
To connect your PC through your IP Deskphone use the following procedure:
1. Connect one end of the PC Ethernet cable to your IP Deskphone using the RJ-45 connector
marked with the network symbol.
May 2016
on page 36
Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
Connecting the components
®
User Guide 41