Avaya 1120E User Manual page 128

Active calls and call features
OR
Press the Back soft key to return to the previous menu.
To program a Do Not Disturb feature key:
To program a Do Not Disturb feature key, beginning from
feature key" on page 126:
1. Press the Select soft key.
2. Select Do not disturb.
3. Press the Select soft key.
4. Use the dial pad to enter a key label.
5. Select a User.
6. Press the Select soft key.
7. Press the Finish soft key to confirm the entry and complete the procedure.
OR
Press the Back soft key to return to the previous menu.
To program a Send IM feature key:
To program a Send IM feature key, beginning from
key" on page 126:
1. Press the Select soft key.
2. Select Send IM.
3. Press the Select soft key.
4. Use the dial pad to enter a key label.
5. Press the Next soft key.
6. Use the dial pad to enter an address.
7. Press the Finish soft key to continue.
To program a Presence feature key for Presence Model v6:
Beginning from Step 6 in the procedure "To modify a feature key"
1. Press the Select soft key.
2. Press the Up/Down navigation key to highlight one of the following:
• Connected
• Unavailable
3. Press the Select soft key to select Presence.
OR
Press the Back soft key to return to the previous step.
4. You can choose a more detailed message as follows for other users to see or you can select
None if you do not want to give additional information.
5. You can choose a status from the following:
May 2016 Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
Step 6 in the procedure "To modify a
Step 6 in the procedure "To modify a feature
on page 126:
®
User Guide 128