Using Call Forward - Avaya 1120E User Manual

To designate a feature key by using the Copy key:
1. Open your Address Book, Call Inbox, or Call Outbox, highlight the entry you want to use for
the feature key, and then press the Copy key.
2. Press the Up/Down navigation key to highlight Speed Dial, Call Forward, or Send IM from
the menu.
Note:
Presence and Do Not Disturb are not programmable by using the Copy key.
3. Press the Select soft key.
4. Press the Up/Down navigation key to highlight the feature key to which to copy the
information to and press Set.
OR
Press the Feature key that you want to use for the service selected.
5. Use the dialpad to enter the label for the feature key.
6. Press the Next soft key to continue. Continue to input information based on the selected
service:
• Speed Dial
• Call Forward
• Send IM
• Presence
See Feature key programming
OR
Press the Back soft key to return to the previous menu.
Related links
Feature key autoprogramming

Using Call Forward

Use the Call Forward feature to direct incoming calls to an alternate destination. You can continue to
make calls from the IP Deskphone but all incoming calls are redirected to the new destination.
When you forward a call to another IP Deskphone, the IP Deskphone that receives the call displays
the name and SIP address (if present) of the caller, the name and SIP address (if present) of the
original called party, and any subject message included with the call. This ensures that the user who
receives the forwarded call knows that the call is forwarded from you, who the call is from, and any
subject message that is included.
May 2016
on page 125.
on page 130
Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
Using Call Forward
®
User Guide 133