Configuring Do Not Disturb; Configuring A Presence State - Avaya 1120E User Manual

Active calls and call features

Configuring Do Not Disturb

Use Do Not Disturb to automatically block all incoming calls. When you activate this feature, the
calling party receives a busy signal.
To enable Do Not Disturb
1. Press the DND soft key on the idle display (press the More... context-sensitive soft key until
DND appears).
2. Press the Enable soft key to configure the IP Deskphone to Do Not Disturb.
OR
Press the Back soft key to return to the previous menu.
3. Press the Ok soft key to return to the Services menu.
To disable Do Not Disturb
1. Press the Disable soft key to configure Do Not Disturb.
OR
Press the Back soft key to return to the previous menu.
2. Press the Ok soft key to return to the Services menu.
Related links
Active calls and call features

Configuring a Presence state

The Presence feature enables other users to see and monitor your availability state. There are two
different models (versions) which Presence supports: the older model v6 and the newer model v7.
Which model is used depends on a configuration parameter. Contact your administrator to find out
which model is used on your system.
Model v6 has only one mode from which you can select from a list of states. However, in model v6
there are several states which are published automatically when corresponding events occur. For
example, the state "On the Phone" is published in case the user makes a call and their current
phone state is "Connected". State "On hook" is published when the call is finished and only if phone
state is "Connected".
Model v7 supports two modes: automatic and manual. In the automatic mode, the desk phone
manages the user presence state. While in manual mode, the user can select a state from a
predefined list. Only in model v6 can a user create their own states.
To configure a Presence state for Presence Model v6:
1. Press the Presnce soft key (press the More... context-sensitive soft until Presnce appears).
2. Press the Change soft key to change your current Presence state.
OR
May 2016
on page 111
Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
®
User Guide 136