Incoming Calls With Precedence - Avaya 1120E User Manual

Advanced features
5. Press the Prec soft key and navigate to the desired precedence.
6. Press the Select soft key to select the desired precedence.
7. Press the Send soft key to initiate the call.
Related links
Making a call with MLPP
Making an MLPP call by using a programmed speed dial key
You can make an MLPP call by using a programmed speed dial key
To make an MLPP call by using a programmed speed dial key
1. Press the pre-programmed speed dial key.
2. Go off-hook.
The IP Deskphone displays the off-hook screen containing the address assigned to the
speed dial key.
3. Press the Prec soft key and navigate to the desired precedence.
4. Press the Select soft key to select the desired precedence.
5. Press the Send soft key to initiate the call.
Related links
Making a call with MLPP

Incoming calls with precedence

Four types of incoming calls with precedence can be displayed.
1. Precedence call without subject
2. Precedence call with subject
3. Redirected precedence call without subject
4. Redirected precedence call with subject
Note:
When there is a call with an incoming precedence level higher than Routine, the Redirect soft
key is not displayed.
Precedence alerting tone
A precedence alerting tone is played to alert you that a precedence call with a precedence level
higher than Routine is arriving. This tone is delivered through the Handsfree speaker. This tone is
played if there is no active call or if a call is on hold.
May 2016
on page 167
on page 167
Avaya 1120E IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
®
User Guide 170