Removing A Fan Module From An Acx5000 Router; Figure 44: Installing A Fan Module In A 1 U Acx5048; Figure 45: Installing A Fan Module In A 2 U Acx5096 - Juniper ACX5048 Manual

ACX5048 and ACX5096 Universal Access Router
Related
Documentation

Removing a Fan Module from an ACX5000 Router

134
modules are designed so that they can only be inserted into the ACX5000
product SKU that supports the same airflow type. See
and Airflow in an ACX5000 Router" on page 33
Using a Phillips screwdriver, turn the locking screw until it is tight.
4.

Figure 44: Installing a Fan Module in a 1 U ACX5048

Figure 45: Installing a Fan Module in a 2 U ACX5096

Removing a Fan Module from an ACX5000 Router on page 134
Cooling System and Airflow in an ACX5000 Router on page 33
Field-Replaceable Units in an ACX5000 Router on page 5
Management Panel of an ACX5000 Router on page 17
The fan modules in ACX5000 routers are hot-removable and hot-insertable field
replaceable units (FRUs): you can remove and replace them without powering off the
router or disrupting routing functions.
CAUTION: Replace a failed fan module with a new fan module within 1 minute
of removal to prevent chassis overheating. Before removing the fan module,
ensure you have a replacement fan module at hand.
Before you remove a fan module from a ACX5000 router, ensure that you have taken
the necessary precautions to prevent electrostatic discharge (ESD) damage (see
Prevention of Electrostatic Discharge Damage).
"Cooling System
for more information.
Copyright © 2015, Juniper Networks, Inc.