Configuring A Rule For A Basic Ipv6 Acl - HP 1910 User Manual

Click Apply.
4.
Table 138 Configuration items
Item
ACL Number
Match Order

Configuring a rule for a basic IPv6 ACL

Select QoS > ACL IPv6 from the navigation tree.
1.
Click the Basic Setup tab to enter the rule configuration page for a basic IPv6 ACL, as shown
2.
in Figure
Figure 452 Configuring a rule for a basic IPv6 ACL
Add a rule for a basic IPv6 ACL.
3.
Click Add.
4.
Table 139 Configuration items
Item
Select Access Control List (ACL)
Description
Enter a number for the IPv6 ACL.
Select a match order for the ACL. Available values are:
•
Config—Packets are compared against ACL rules in the order the rules are
configured.
•
Auto—Packets are compared against ACL rules in the depth-first match order.
452.
Description
Select the basic IPv6 ACL for which you want to configure rules.
434