Table of Contents
Advertisement
7. Detailed Descriptions
Process Control
Changes from the Previous Machine
Items
MUSIC
execution
Mechanism
Sensor Construction
The ID Sensors (also called the TM/ID sensors) are used to measure the amount of toner on the Transfer
Belt and to correct any errors in color registration.
The TD sensor (also called the
Outline of the ID Sensors
The ID sensors are fixed onto the main frame, against the surface of the Transfer Belt. Color registration
is checked by all three sensors; the Front [A], Center [B], and Rear [C].
The center sensor [B] acts as an ID sensor and a MUSIC sensor.
1218
MP C3003/C3503/
C4503/
C5503/C6003
Executing rough
adjustment -> fine
adjustment only
sensor) is used to measure the toner density in the developer.
MP C3004/C3504/C4504/
C5504/C6004
Process upon execution of SP2-111-004 (Forced Line
Position Adj.: mode d) and [Color Registration] on
User Tools have been changed.
• Normal Operation: rough adjustment -> fine
adjustment -> contact MUSIC (a new process) ->
fine adjustment (R.F)
• With Imageable Area Extension Unit: rough
adjustment -> fine adjustment
Advertisement
Table of Contents
Troubleshooting
