10 Second Recovery From Sleep Mode - Ricoh MP C3004 Field Service Manual

Hide thumbs Also See for MP C3004:

Table of Contents

10 Second Recovery from Sleep Mode

Some previous machines took more than 10 seconds to print the first sheet to the finisher tray from sleep

mode. This machine can reduce the time to print the first sheet to the finisher tray by reducing the

productivity at startup.

[Reference] Measurements on Previous Machine (Met-C1)

Machine Model

By setting [Output Priority When Paper is Fed to Finisher] in User Tools to [Print Start Time], the

productivity at recovery time is adjusted as follows and the time to start printing is kept within 10

MP C6004 specification

Start time from sleep mode

Up to 4 seconds

5 to 8 seconds

9 seconds or more

Press [User Tools] icon> [Machine Features] > [System Settings] > [General Settings] >

[Output Priority When Paper is Fed to Finisher].

Set to [Print Start Time].

Improving the Print Start Time under Low Temperature, Low Humidity, or at Low

In this machine, there are SP to reduce the initial productivity in order to speed up the print time even

under low temperature, low humidity, or low voltage condition in which the print start tends to be

delayed. When these functions are enabled, the first sheet printing time is reduced with initial

productivity equivalent to"Print Start Time"in "Output Priority When Paper is Fed to Finisher".

• SP1-120-001 (Recovery mode SW:Low Temp)ON [1] / OFF[0]

• SP1-120-002 (Recovery mode SW:Voltage:Low) ON [1] / OFF[0]

(First Print time from Sleep Mode to Finisher

Continuous print speed

Print start time priority

Mp c4504 Mp c3504 Mp c5504 Mp c6004