Recovery Time/Reduced Electrical Consumption; Fusing Unit Off Mode (Energy Saving) On/Off; Energy Saving Recvry. For Business Applicatn. - Ricoh MP C3004 Field Service Manual

Hide thumbs Also See for MP C3004:

Table of Contents

7. Detailed Descriptions

Depending on which Embedded Software Architecture application is installed on it, the machine

might take longer than indicated to enter Sleep mode.

User Tools (System settings > Timer setting)

Specifies whether Fusing Unit Off mode is enabled or not.

When Fusing Unit Off mode is enabled, the display is on but the fusing unit is off to save energy.

The machine requires roughly the same time as warm-up time to recover from Fusing Unit Off

Default: [Off]

If [Fusing Unit Off Mode (Energy Saving) On/Off] is set to [On], you can specify when to exit

Fusing Unit Off mode and the time to elapse before entering Fusing Unit Off mode.

If [Exit Fusing Unit Off Mode] is set to [On Printing], the machine exits Fusing Unit Off mode when

printing is performed.

If [Exit Fusing Unit Off Mode] is set to [On Operating Control Panel], the machine exits Fusing Unit

Off mode when a key other than the copy function key is pressed on the control panel of the

If printing is performed with the copy function or a key in the copy function is pressed on the control

panel of the machine, the machine exits Fusing Unit Off mode regardless of this setting. If the timer

is set to [On], you can set the time from 10 seconds to 240 minutes, using the number keys.

User Tools (System settings > General Settings)

Specify whether or not to enable low-energy recovery from Sleep mode to use applications

independent of the machine, such as Address Book Management or Browser.

Default: [Off]

If [On (Energy Saving)] is selected, it takes longer than usual to be ready to use the machine.

Recovery Time/Reduced Electrical Consumption

Reduced electrical consumption in Sleep mode:

Recovery time from Sleep mode

Mp c4504 Mp c3504 Mp c5504 Mp c6004