Table of Contents
Advertisement
No.
Description
1
Pressure release lever
2
Friction roller
Paper feed transport mechanism
In this machine, to maintain the paper gap constant, the paper feed sensor near the paper feed roller
adjusts the paper feed timing.
1.
The paper feed motor is switched ON, and the first sheet is supplied.
2.
Just before the rear edge of the first sheet leaves the paper feed roller, the Paper feed
motor switches OFF.
At this time, if the paper feed sensor detects "Paper Out" (if a second sheet has not been
transported to the paper feed sensor position), the paper feed motor does not switch OFF, and pre-
feed is performed. Pre-feed is as follows:
1. The second sheet is transported to the paper feed sensor position.
2. When the rear edge of the second sheet passes the paper feed roller, the paper feed motor
switches OFF.
3.
When the first sheet is transported a predetermined distance by the downstream
transport roller, the paper feed motor switches ON to supply the second sheet of paper.
Paper size detection (1st paper supply tray)
Size cannot be detected only with set detection.
• 1st tray settings:
No.
Description
3
Pick-up roller
Paper Feed / Transport Section
1267
Advertisement
Table of Contents
Troubleshooting
