5. System Maintenance
NVRAM Data Upload/Download
Uploading Content of NVRAM to an SD card
Do the following procedure to upload SP code settings from NVRAM to an SD card.
• This data should always be uploaded to an SD card before the NVRAM is replaced.
• Make sure that the write protection of an SD card is unlocked.
1.
Do SP5-990-001 (SP Print Mode: All(Data List)) before you switch the machine off. You
will need a record of the NVRAM settings if the upload fails.
Make sure to shut down and reboot the machine once before printing the SMC. Otherwise, the
latest settings may not be collected when the SMC is printed.
2.
Turn OFF the main power.
3.
Remove the SD card slot covers [A] [B].
MP C4504/C5504/C6004:
MP C3004/C3504:
802