Ricoh MP C3004 Field Service Manual page 817

Type
FCU device log • When a specified amount of
Operation panel log • When an error related to the
• Device logs are not saved in the following conditions:
• While erasing all memory
• While data encryption equipment is installed
• While changing the firmware configuration
• Forced power OFF (accidentally disconnecting the outlet)
• Engine device log while the machine is shutting down
• When the power supply to the HDD is off because of energy saving (engine OFF mode/STR
mode)
• When one of the following SCs occurs: SC672, SC816, SC819, SC878, SC899, SC859,
SC860, SC861, SC863, or SC864
• The following logs are not saved:
• Logs related to the energy saver mode (Engine-off, suspend-mode, or other cases)
Network communication log
Logs related to NRS
IP-FAX log
Access log for unauthorized users (guests)
• HTTP session timeout log
• Auto log-out log
• IC card related log
• Authorization for Fax
Storage Timing
FCU device log is stored in the
FCU. If fax application is
unavailable (e.g. not
installed), the machine does
not transfer the log.
operation panel occurs.
Capturing the Device Logs
Destination (maximum storage
capacity)
HDD or SD card connected to the
service slot
Memory in the operation panel.
809