Ricoh MP C3004 Field Service Manual page 1336

7. Detailed Descriptions
State
Standby/Printing
Printing state/Panel
OFF
fusing OFF
Quiet state
Engine OFF
STR state
Pre-recovery
*1 When [Energy Saving Recvry. for Business Applicatn.] is [On (Energy Saving)], ON/OFF is
determined by the internal timer of the Smart Operation Panel.
Transition of operation panel to Energy Saving when [Energy Saving Recvry. for Business
Applicatn.] is [On (Energy Saving)]
Normally, the Energy Saving state of the operation panel LCD changes in step with the energy
saving state of the MFP/LP main unit, but to support the scenario where an application that does
not use the engine (printer/scanner) is executed from the operation panel, the Energy Saving state
of the operation panel is transitioned through the three states ON, OFF, and Sleep with its internal
timer when [Energy Saving Recvry. for Business Applicatn.] is [On (Energy Saving)].
1328
Energy Saving Operation panel
LED
LCD
ON ON
ON OFF
ON ON
ON OFF
ON*1
Blinking Sleep
gradually
OFF or ON*1
ON*1
Blinking Sleep
gradually
ON OFF
ON*1
Engine
HDD
(Printer/Scanner)
ON ON
ON ON
(Only scanner is in
Quiet state)
ON ON
(Both printer/
scanner are in
Quiet state)
ON ON
(Both printer/
scanner are in
Quiet state)
OFF OFF
ON*
1
OFF OFF
OFF ON
CTL
ON
ON
ON
ON
ON
STR
ON