Reverse Sensor: Late Jam: Cause Code 024 - Ricoh MP C3004 Field Service Manual

Reverse Sensor: Late Jam: Cause Code 024

Target Part/SP No.:Reverse Sensor / SP5-803-009 (Inverter Sensor)
Cause verification
Execute an INPUT check when there is no paper at the position
of the referenced sensor.
Execute an INPUT check when there is paper at the position of
the referenced sensor.
Solution:
• Clean the sensor.
• Reconnect the connector.
• Replace the sensor.
• Replace the Paper Transport IOB.
• Replace the harness.
Target Part/SP No.: Reverse Motor / SP5-804-047 (Inverter Motor:CW:Standard Speed)
Cause verification
Turn the referenced motor OFF with OUTPUT check
Turn the referenced motor ON with OUTPUT check
Solution:
• Reconnect the connector.
• Replace the motor.
• Replace the Paper Transport IOB.
• Replace the harness.
Target Part/SP No.:Paper Exit Switching Solenoid / SP5-804-004 (Exit Junction Solenoid)
Cause verification
Turn the referenced solenoid OFF with OUTPUT check
Turn the referenced solenoid ON with OUTPUT check
Solution:
• Reconnect the connector.
• Replace the solenoid.
Troubleshooting for Transport/Paper Feeding of the Machine
Problem Judgement
0 :Paper detected
1: Paper not detected
Problem Judgement
Drive sound heard
Drive sound not heard
Problem Judgement
Drive sound heard
Drive sound not heard
1121