8.
Move the movable tray [A] up and down to check that the Mylar does go through the
sensor properly.
9.
Re-attach the left lower cover (
10.
Re-attach the finisher front cover (
Paper Curl Problem for SR3180 (D766)
When using the mixed mode, duplex (curls towards the lower side) over the simplex (curl towards the
upper side) and paper curl occurs, attach the auxiliary tray (D7667010), disable the paper exit full
sensor, and paste the Mylar.
x2)
x2)
Troubleshooting for Finishing Options
1147