7. Detailed Descriptions
Tray
By-pass feed tray
Duplex unit
Tray base plate lift
When the paper feed tray is set in the machine, the set switch at the rear of the tray switches ON, and it
is detected that the tray is set.
The coupling between the shaft at the rear of the tray and the lift motor then engages, the motor rotates,
and the tray base plate is lifted. The tray base plate lifts until the paper surface pushes the Pick-up roller
up, the upper limit sensor switches OFF (interrupt), and the machine enters paper feed standby mode.
When the tray is removed, the coupling is released, and the base plate moves down. The lift motor then
rotates until the coupling returns to the home position.
1264
Loading number of
Paper size
sheets
SRA3 - postcard
100 sheets
SRA3 - A6 portrait
Interleave
Corresponding paper
thickness
2
60 to 300g/m
2
60 to 256g/m