Duplex Entrance Sensor: Lag Jam: Cause Code 067
Target Part/SP No.:Duplex Entrance Sensor / SP5-803-011
Cause verification
Execute an INPUT check when there is no paper at the
position of the referenced sensor.
Execute an INPUT check when there is paper at the position
of the referenced sensor.
Solution:
• Clean the sensor.
• Reconnect the connector.
• Replace the sensor.
• Replace the Paper Transport IOB.
• Replace the harness.
Target Part/SP No.:Duplex Entrance Motor/ SP5-804-065 (Duplex Entrance
Motor:CW:Standard Speed)
Cause verification
Turn the referenced motor OFF with OUTPUT check
Turn the referenced motor ON with OUTPUT check
Solution:
• Reconnect the connector.
• Replace the sensor.
• Replace the Paper Transport IOB.
• Replace the harness.
Target Part/SP No.:Duplex/ Bypass Motor / SP5-804-071 (Duplex Bypass
Motor:CW:Standard Speed)
Cause verification
Turn the referenced motor OFF with OUTPUT check
Turn the referenced motor ON with OUTPUT check
Solution:
Troubleshooting for Transport/Paper Feeding of the Machine
Problem Judgement
0 :Paper detected
1: Paper not detected
Problem Judgement
Drive sound heard
Drive sound not heard
Problem Judgement
Drive sound heard
Drive sound not heard
1127